NEWS

China's laser welding machine has been developed for more than a decade, and with the rapid development of laser equipment in the domestic market in the first few years, the development of these two years is significantly lower, so the domestic laser welding machine is faced with what is analyzed below for you!

Laser welding machine as an advanced welding method, in all walks of life have applications. In the process of laser welding machine, there will always be some big and small failures. The following is a summary of the common failures of laser welding machines and solutions.

Pipe making machine is a common industrial machinery and equipment, its working principle is as follows:Pipe making machine is mainly composed of feeding system, heating system, pipe making system and discharging system. Feeding system: Firstly, the pipe to be processed will be loaded into the feeding system, and the feeding system will feed the pipe into the heating system. Heating system:. The heating system, by means of electromagnetic heating or flame heating, . The tube is heated to the required temperature. The heating temperature is usually controlled by controlling the current of the electromagnetic coil or by adjusting the flame size.

The principle of the pipe cutting machine is through the computer, hydraulic cooperation, by the electrical system to control the hydraulic system of the oil movement direction, push the drag plate for straight line back and forth movement. Microcomputer will walk in accordance with the user's self-programmed knife route, in the round-trip movement, from the drag plate limit detected signals as a basis for controlling and changing the oil movement, so as to achieve the expected walk plus the route. Seek to purchase the pipe cutting machine should also understand its three way; This machine tool is widely used in the puller industry and other stainless steel pipe cutting.

The operator of the pipe cutting machine must be familiar with all the buttons and switches of this equipment and the manual and automatic operation process. This equipment is suitable for cutting welded pipe for rollers, and shall not be used for cutting other materials.