NEWS

Pipe making machine in the work of the role played by more and more attention, then how to effectively improve its efficiency? The author believes that know how to maintain the pipe making machine can realize the improvement of efficiency. The following Jingjiu pipe making machinery and share with you the maintenance experience of the pipe making machine.
1, often check the oil tank on the oil level, the oil level shall not be lower than the specified value.
2、Fine oil filter needs to be replaced in time when it is clogged with dirt; coarse oil filter should be cleaned in time when it is clogged, once in 3 months.
3, to the oil tank refueling, must be filtered, the oil can not be mixed with water, rust, metal shavings and fibers and other impurities.
4, in the winter or cold areas to start the pump, you should start and stop, repeat a few times, so that the oil temperature rises, to be flexible hydraulic pump station operation before starting work.
5, hydraulic pump station on all the knobs, non-operators shall not move.
6, often observe whether the power supply voltage has abnormal fluctuations, and every 3 months or so overhaul.
The correct maintenance of the pipe making machine plays a great role in the efficiency and life of the equipment.

Working principle
The working principle of the flexible pipe making machine: the strip material is introduced into the pipe welding machine through the loading machine, the strip material is extruded and shaped through the rollers, and then welded and rounded by argon arc welding with mixed gas protection, the output of the required length of the pipe is cut off by the cutter mechanism, and then straightened by the straightening machine. Spot welding machine is used for spot welding connection between strip heads. This type of pipe making machine is a comprehensive set of equipments to weld the strip material into pipe continuously and to calibrate and straighten it.